In this IPv6 series I’d like to tell you about my “journey” to implement the protocol at home and in the lab. This part explains how IPv6 can be used with NSX-T in the datacenter. Expect the creation and / or configuration of T0 and T1 routers, Uplink configuration, Static […]
Today’s NSX-T topic is about automatically configuring hosts with IPv6 addresses. During the writing of my IPv6 series, I wondered what options are available in NSX-T and which use-cases they serve. The full list on IPv6 posts can be found here: IPv6 posts. In a IPv4 network, DHCP is used […]
In this part of the NSX-T tidbits series, it’s about the current IPv6 support. During the writing of my IPv6 series, I needed to know which features are currently support in the current (3.1) version and found out there isn’t a good overview of it. After digging into blog posts […]
In this IPv6 series I’d like to tell you about my “journey” to implement the protocol. I already had some knowledge of it, but not extensively. As a first step IPv6 is implemented at home. The plan is to work my way back from home to my lab in the […]
In this IPv6 series I’d like to tell you about my “journey” to implement the protocol. I already had some knowledge of it, but not extensively. As a first step I implemented it at home. The plan is to work my way back from home to my lab in the […]
In this IPv6 series I’d like to tell you about my “journey” to implement the protocol. I already had some knowledge of it, but not extensively. As a first step I implemented it at home. The plan is to work my way back from home to my lab in the […]
Not due to shortages in IPv4 address, because that’s relative (looking at the 4 million IPv4 addresses Amazon bought this year from AR|DC‘s AMPRNet), but more due to personal interest and being able to equip all your devices with public IP’s (and not having to use NAT masquerading) is interesting. […]
One of my Raspberry Pi’s runs Ubuntu Server 20.04 (Focal) and has a static IP interface configuration using systemd. The Pi is configured in the same way as in the previous post on this topic, “Linux interface config with systemd“. The previous post describes how systemd can be configured for […]