NSX 4.0 onwards only supports vSphere 7 and later. In my homelab I’m still running ESXi 6.7 which is joined to a vCenter 8 instance. It’s because the RAID controller in my host is unsupported in ESXi 7+ and no native drivers are available. Running an older ESXi version is Read more…
In most cases VMware Tools are available as part of ESXi installation. When updating an ESXi host, the VMware Tools could be updated, but most of the time not to the latest version. In this post I’ll show you how ESXi hosts can updated to the latest available version, when Read more…
How to manual update you ESXi host with the latest VMware patches.
My latest homelab addition is the Maxtang NX6412 NUC which was given by VMware, together with Cohesity (many thanks both!) at VMware Explore to all vExperts who registered for the gift. After adding RAM and a SATA SSD, it was time it ran ESXi 8. The specs of this neat, Read more…
Once and a while ESXi needs to be installed on a device of which the drivers (NIC / Storage) are not built into the ISO installer (yet). In my case it’s needed for the vExpert homelab Maxtang NUC device. This device has a Realtek PCIe NIC’s not supported by ESXi Read more…
Although vSphere 8 is released (GA) at VMware Explore Europe 2022 and modified exams can be expected, the vSphere 7 ones are still current. Also at Explore I took the Advanced Design VMware vSphere 7.x exam and passed it to update my VCDX-DCV certification based on vSphere 6.5 to the Read more…
Since PowerCLI 13 is released last week (November the 22nd, 2022), I started the update process on my Windows and MacOS device. I needed the latest version to be able to create a customized ESXi 8 ISO installer for the vExpert Maxtang NUC that has the Realtek USB NIC drivers Read more…
While working with a customer to get them onboarded in a VMware NSX (NSX-T) based Cloud Director environment, a use case for NO SNAT rules presented itself that I want to share. In this case the customer has an NSX-T based Edge gateway (T1) connected to a dedicated (VRF based) Read more…
While troubleshooting of a failed SDDC Manager deploy task in Cloud Foundation 4.4 together with VMware support, the engineer showed a way to update the SDDC bring-up parameters. This can be very helpful because it can restart a failed SDDC deployment with updated parameters. This prevents redeploying the physical servers Read more…
Recently I moved to the latest Cloud Foundation version (v4.4) in a lab environment that I often re-deploy. I noticed that during the Cloud Builder bring-up phase the deploy of the SDDC managed failed ever since, while using the same input parameters in the deployment parameters workbook. So it worked Read more…