In most cases VMware Tools are available as part of the ESXi installation. When updating or upgrading vSphere on an ESXi host, the VMware Tools could be updated, but most of the time not to the latest version. In this post I’ll show you how ESXi hosts can updated to Read more…
How to manual update you ESXi host with the latest VMware patches.
My latest homelab addition is the Maxtang NX6412 NUC which was given by VMware, together with Cohesity (many thanks!) at VMware Explore EU (in the US co-sponsored by NetApp) to all vExperts who registered for the gift. After adding RAM and a SATA SSD, it was time it ran vSphere Read more…
Once and a while ESXi needs to be installed on a device of which the drivers (NIC / Storage) are not built into the ISO installer (yet). In my case it’s needed for the vExpert homelab Maxtang NUC device. This device has a Realtek PCIe NIC’s not supported by ESXi Read more…
While troubleshooting of a failed SDDC Manager deploy task in Cloud Foundation 4.4 together with VMware support, the engineer showed a way to update the SDDC bring-up parameters. This can be very helpful because it can restart a failed SDDC deployment with updated parameters. This prevents redeploying the physical servers Read more…
Recently I moved to the latest Cloud Foundation version (v4.4) in a lab environment that I often re-deploy. I noticed that during the Cloud Builder bring-up phase the deploy of the SDDC managed failed ever since, while using the same input parameters in the deployment parameters workbook. So it worked Read more…
One of my Raspberry Pi’s runs Ubuntu Server 20.04 (Focal) and has a static IP interface configuration using systemd. The Pi is configured in the same way as in the previous post on this topic, “Linux interface config with systemd“. The previous post describes how systemd can be configured for Read more…
In this IPv6 series I’d like to tell you about my “journey” to implement the protocol at home and in the lab. This part explains how IPv6 can be used with NSX-T in the datacenter. Expect the creation and / or configuration of T0 and T1 routers, Uplink configuration, Static Read more…
In this IPv6 series I’d like to tell you about my “journey” to implement the protocol. I already had some knowledge of it, but not extensively. As a first step IPv6 is implemented at home. The plan is to work my way back from home to my lab in the Read more…
In this IPv6 series I’d like to tell you about my “journey” to implement the protocol. I already had some knowledge of it, but not extensively. As a first step I implemented it at home. The plan is to work my way back from home to my lab in the Read more…